Pard NV007SP Tube

This tube is designed to replace the pard NV007SP tube.

This unit will not work alone as it has to be connected to our Universal Scope Holder USH-46.

Made of aluminium.

The size of thread is m42 x 0.6 pitch

Length: 19.2mm

Please note:

This unit will not work on any scopes with shorter ocular less then 25mm between the end of the ocular and the reticle illumination control.

Setup instructions:

1. Have the 007SP & EVC adapter connected, then slip them over the eyebell and tighten almost fully.

2. Digitally zoom-in the 007SP to ×3.5, look through it and manipulate the 007SP until the reticle on-screen is centred both horizontally and vertically.

3. Now fully tighten the EVC adapter.

…it can still pivot slightly, with the multiple ‘fingers’ of the adjustable collet acting like a slightly malleable ball-joint, for fine-tuning.

4. Now back-off the zoom to 0x and you have a perfectly centred 007SP/scope setup.