MTC VIPER CONNECT Scope Mount Up to 108 MOA One Piece Infinity Elevation Adjustable Picatinny 30 mm

^{This well-designed scope mount allows a scope to move vertically along the chosen path. The mount is lockable in different positions using two screws.}

^{The mount can be used as low profile or adjusted to the high profile too if your scope objective is too close to your rifle barrel or shroud.}

^{This practical patent improves quality of long-range shooting. It helps shooters who run out of adjustment clicks on their turrets.}

^{The mount can also come handy if you have not been able to use your favorite scope due to lack of space between the rings or unusual position of your dovetail or picatinny rail on your gun.}

^{We are very proud of this product as it has become a “must have” solution among people who love their bullpups.}

^{The design of the mount is dedicated to people who want to improve their performance on the contrary with how ordinary mounts allow to perform. By keeping the front mount at its lowest and by elevating the rear mount to the highest point, you can zero in your gun far beyond what standard mounts allow you to do, without using the clicks on your turrets, hence keeping the optical centre of your scope intact (ideal situation for long range shooting).}

^{Please note: DO NOT use more than 4x elevation screws as you may damage your mount.}

Details:

^{Height: 65 mm to 69.5 mm (adjustable)}

^{Profil Height: 21 mm}

^{Adjustable Height: 4.5 mm}

^{Weight: 92 g (each one)}

^{Centre of the ring to the bottom of the rail: 38 mm in closed position}

^{Centre of the ring to the bottom of the rail: 42.5 mm in open position}

^{Ring size: 34 mm}

Rail size: 22 mm picatinny

The pack contains:

• 1x Infinity Scope Mount
• 1x Allen Key
• 4x Small Spare Screws
• 2x Large Spare Screws
• 1x Waterproof case
• 1x Lens air pump dust blower

Pressure calculation:

^{Available Accessories:}

• ^{Mounting Adapter: converting 20 mm Picatinny to 11 mm dovetail}
• ^{Ring adapter: converting 30 mm ring to 25 mm ring}
• ^{Accessory top ring with Picatinny rail on top of each ring (useful for mounting a torch)}
• ^{Bubble levels (Yellow/Orange/Red/Green/Clear/Blue/Black)}
• ^{Extra Picatinny bracket which can be added to the side of the mounts (4 can be added easily)}

By adding 11 mm x 80 mm to Picatinny Adapter you will be able to use the mount on Picatinny or dovetail rifle rail.
There are two ways in which you can use this adaptor with your rifle:

1: By tightening a few screws on the side – the adaptor will stay on your rifle

(can be locked with 2 x grab screws from top will stay tight and secure)

2: By taking the side screws off and placing the adaptor to your scope mount rail –
when tightened the scope, the mount rail will be squeezed and you can grab the rifle rail.