BACKWARD 170MM, 210MM, 250MM Up to 108 MOA Windage, Elevation, Fully adjustable Picatinny mount ZULUS SYTONG, PARD

We have designed and developed an amazing new picatinny mount.
We are very proud of this product as its development resolves some issues for shooters, who depend on the reliability of a solid mount.

What’s the difference between FORWARD CENTRE and BACKWARD:

FORWARD;  the base wing nuts its on the right side and Picatinny side rail its on the left side (the forward can be mounted as backward too the wing nuts and side paicatinny will be posit side)

CENTRE;  the base can be install any direction and mounted as backward or forward

BACKWARD; the base wing nuts its on the left side and Picatinny side rail its on the right  side (the backward can be mounted as forward too the wings nuts and side picatinny will be on the opposite side)

The base it’s the only difference between FORWARD CENTRE and BACKWARD the screws and side Picatinny rail will be on  on the

Main benefits of this mount:

1. NV scope:

It can be directly fitted to the SYTONG HT-60, HT-60LRF, ZULUS ZHD520R. vision scope.

It can be directly fitted up to the PARD NV008, LRF NV008S, NV008S LRF LRF/SA32/SA62/SU series.

it can be use with any scopes.

distance between the base Bracket can be adjusted.

2. Adjustability:
FULLY ADJUSTABLE, FORWARD , ELEVATION, WINDAGE, EYE RELIEF AND HEIGHT ADJUSTMENT, that allows the scope to move vertically and horizontally along a guided path, and lockable in different positions,

3. Combined with Scope cam:
This mount allows users to adjust their scope forward, backwards, or adjust it vertically to align the scope with their eye relief or eye level.
Users wishing to use their scope camera and record a session while shouldering their rifle, but the screen needs to be further to their eyes, or, for some applications they might require the camera to be closer to the eyes, such as pard/ Nightvision scopes etc.

4. Longer range shooting:
long range before running out of adjustment on the turrets
is the ability for users who need to reach out further but are restricted by their current mounting system.
By keeping the front mount at it’s lowest and elevating the rear mount to the highest point you can zero in your gun far beyond, without using the clicks on your turrets, hence keeping the optical centre of your scope intact.

5. Multiple rifles:
This system can be used to install scope mounts for the owner’s of multiple rifles who require to use one scope for all of their rigs by installing one Infinity mount to each rifle.
They can zero then just swap the scope between them, with little need for turret click adjustment.

6. Durability:
This product is robust enough to be installed on heavy recoil rifles, up to 25 caliber firearm.

Technical information for the new ‘INFINITY’ mount:

• Length: 170mm 210mm 250mm
• Profile height from bottom of the mount to middle of the top picatinny rail, 21.5mm.
• Total height: 30.50mm
• Adjustable Height: 4.5mm
• Weight: 170mm 165 grams without side rail 205 grams with side rail.
• Weight: 210mm 180 grams without side rail 230 grams with side rail.
• Weight: 250mm 195 grams without side rail 250 grams with side rail.

Product includes:

1x set of mount included side Picatinny rail
3x Allen keys, (two different sizes)
2x Side screws
1x M5 spring screws
4x M5 Sytong attachment screws
1x Waterproof case
6x Aluminium washers M6 to M5 adapter for Sytong and Pard NV008 NV008 LRF
1x Lens Air Pump Dust Blower

Please note:
The washers must be placed between the screws and the mount.
The washers are flat and once they start being tightened their shape adjusts to the countersunk holes.

Torque calculation:
Adjustable side screws maximum torque,
53-71 inch-pound force to 6-8 NM Newton Meters.
Picatinny nuts maximum torque,
53-71 inch-pound force to 6-8 NM Newton Meters.

Available Accessories:
* Mounting Adapter: converting 21mm Picatinny to 11mm dovetail.
*Mounting Adapter: converting 21mm Picatinny to 13mm dovetail.
* Bubble levels (Clear/Yellow/Blue/Black/Green/Orange/Red)

by adding 11mm or 13mm to Picatinny adaptor you will be able to use the mount on Picatinny or dovetail rifle rail.