Create Your Own Classic Scope Camera Mounting System
Mount base: comes with UN-1, UN-2, UN-3 and MPH-1, plus (x6) 12mm steel screws, (x6) 6mm steel screws, (x6) 6mm nylon screws, large case and a lens air pump dust blower.
SELECT YOUR SCOPE HOLDER OR RING
USH-46: This universal scope holder will allow you to connect any of our camera mounting systems to almost any scope from 40mm-46.5mm outer scope diameter.
SHR-36 or (HSW-1) scope pitch size M36 X 0.6SHR-38 or (HPS-2) scope pitch size M38 X 0.6SHR-39 scope pitch size M39 X 0.6
Any of our SCOPE HOLDER RINGS (SHR) will allow you to connect any of our camera mounting systems to your scope.
Please note: before you select any SHR you will need to measure the inside diameter of your scope thread for your eye relief.
SELECT YOUR CAMERA RING OR A SMART PHONE HOLDER
UMPH-90: Allows you to connect any mobile phone to your side cam.
UCH-1.1 & 1.2: Allows you to connect almost any camera, camcorder or DSLR to your side cam.
SCR-100 & CCT-10: Allows you to connect SONY MARK 1, 2, 3, and 4 (will not fit Mark 5 and above), DSC-WX500, VDSC-WX500, DSC-HX80, DSC-HX90, VHX80, HX90, HX90V and HX100, to your side cam.
CCR-5.2 & 2.2: Allows you to connect EX-ZR1600, EX-ZR3000, EX-ZR3500, EX-ZR3600, EX-ZR5000 to your side cam.
CCR-2.1 & 2.2: Allows you to connect EX-ZR700, EX-ZR750, EX-ZR800, EX-ZR850, EX-ZR1700, EX-ZR2000 and EX-ZR2100 to your side cam.
CCR-3: Allows you to connect, EX-ZR1000, EX-ZR1100, EX-ZR1200, EX-ZR1300 and EX-ZR1500 to your side cam.
CCR-1: Allows you to connect EX-ZR100, EX-ZR200, EX-ZR300, EX-ZR400 and EX-ZR500 to your side cam.
If you are using our magnet on your smart phone holder, please make sure the magnet does NOT affect your smart phone. Check Google for information before you start using it. We take NO responsibility for this issue.
The tube threads’ sizes are m42 x 0.6mm.
UN-1: Inside tube diameter is 39mm. Length 53mm, outside diameter 44mm.
UN-2: Inside tube diameter is 43.7mm. Length 62mm, outside diameter 50.5mm.
UN-3: Inside tube diameter is 50.5mm.Length 62mm, outside diameter 56.5mm.
Please note: Not all SONY cameras are suitable for scope-cams, you will need to inquire/research further.
The USH-46 is designed to hold all the scope with or without threads on eye relief and will connect to our existing camera mounting system.
This unit can be connect to 99% of the scopes from eye relief outer with dimension of 40mm to 46.5mm and it will find the centre automatically while you are tightening it.
Here are some valuable tips to help you get the best quality video recordings:
1. Use a good scope with a decent lens and a larger objective.
2. Use a quality camera for recording;
any action camera with a minimum HD ready at 240FPS is preferable.
3. Obtain a good quality fixed camera lens.
4. Ensure that the scope and camera are setup correctly.
5. Use less magnification with the scope; you will notice improved quality by using a fixed magnification, e.g. 10×44
(We do not recommend over x10 magnification with most common scopes on the market).
6. An optical zoom is preferred over a digital zoom, which makes a lower image quality.
We hope these tips will help you to get the best quality from your equipment.
There are no reviews yet.