Fully Universal Smart Phone Mounting System Kit

This kit includes:

1: STANDARD KIT

2: USH-46

3: UMPH-90

This kit fits to 99% of the scopes and smart phones.

STANDARD KIT:

• UN-1
• UN-2
• UN-3
• MPH-1
• 6X 12MM steel screw
• 6X 6MM nylon screw
• 6X 12MM nylon screw
• Soft carry pouch

THE UNIVERSAL SCOPE HOLDER USH-46:

• The USH-46 is designed to hold all the scopes with or without threads on eye relief and will connect to our existing camera mounting system.
• This unit can be connected to 99% of the scopes from eye relief outer with dimension of 40mm to 46.5mm and it will find the centre automatically while you are tightening it.

UNIVERSAL MOBILE PHONR HOLDER UMPH-90:

• is designed to hold almost all smart phones to your scope with or without protection cover case and with clamping screw or with a magnet
• We suggest you to get extra hard flat protection case for your phone, then stick magnet to your case and the plate.

Free case with any camera mounting system over £150

(Case worth £20)

WARNING:

If you are using our magnet on your smart phone holder you need to make sure magnet does NOT effect your smart phone. Please check on google before start using it as we don’t take any responsibility for this issue.

MORE INFORMATION:

• All out tube threads’ sizes are m42 x 0.6mm
• UN-1:  The inside diameter of the middle size tube is 39 mm Length 53mm; the outside diameter is 44mm
• UN-2:  The inside diameter of the un-2 middle size tube is 43.7mm Length 62mm; the outside diameter is 50.5mm
• UN-3:  The inside diameter of the UN-3 large size tube is 50.5mm  Length 62mm; the outside diameter is 56.5mm
• MPH-1:Mobile phone ring MPH-1 thread’s size is 17mm
• Steel screws
• Nylon screws
• All the screws are m42 and you can put them together

Here are some valuable tips to help you record the best quality video: