Infinity Forward Elevation Adjustable Scope Mount 30mm Ring Picatinny FAE-L50

^{We have designed and developed this amazing scope mount that allows it to move vertically along a guided path. The mount is lockable in different positions using two screws.}

^{This invention resolves a lot of problems for shooters who like to shoot long range and often run out of adjustment clicks on their turrets or want to use their scope camera and video record their shooting while shouldering their guns but the screen is too close to their eyes.}

^{The mount can also come handy if you have not been able to use your favourite scope due to lack of space between the rings or the odd position of your dovetail or picatinny rail on your gun.}

^{We are very proud of this product as it has become a ‘must have’ between people who love their bullpups.}

^{The mount allows them to adjust their scope forward or adjust it vertically to align the scope with their eye level.}

^{The best application of this mount however, is for people who want to reach out far more than their ordinary mounts allows them to. By keeping the front mount at it lowest and elevating the rear mount to the highest point you can zero in your gun far beyond your normal mounts allows you to, without using the clicks on your turrets hence keeping the optical centre of your scope intact (ideal situation for long range shooting).}

^{Technical information for our new INFINITY mount:}

^{Height: 68.25mm to 77.75 mm adjustable.}

^{Profile Height: 23 mm}

^{Adjustable Height: 9.5mm.}

^{Weight: 81 g each.} 

^{Centre of the ring to the bottom of the rail: 41mm (in closed position).}

^{Centre of the ring to the bottom of the rail: 51.5mm (in open position).}

^{Ring size: 30mm} 

^{Rail size: 20mm Picatinny}

^{Item includes:}

• 2x Infinity Scope Mount
• 1x Free Bubble Level
• 2x Allen keys (two different sizes)
• 5x Spare Screws
• 1x Protection ring fabric
• 1x Waterproof case
• 1x Lens Air Pump Dust Blower

Pressure calculation:

^{Ring screws maximum torque,}

^{15-20 inch-pound force to 1.68-2.25 NM Newton Meters}

^{Adjustable side screws maximum torque,}

^{53-71 inch-pound force to 6-8 NM Newton Meters.}

^{Picatinny nuts maximum torque,}

^{53-71 inch-pound force to 6-8 NM Newton Meters.}

^{Available Accessories:}

• ^{Mounting Adapter: converting 20mm Picatinny to 11mm dovetail.}
• ^{Ring adapter: converting 30mm ring to 25mm ring.}
• ^{Accessory top ring with Picatinny rail on top of each ring (very good for mounting a torch)}
• ^{Bubble levels (Clear/Yellow/Blue/Black/Red/Orange/Green)}
• ^{Extra Picatinny bracket that can be added to the side of the mounts. (4 can be added easily)}

By adding 11mm X 80mm to Picatinny adaptor you will be able to use the mount on Picatinny or dovetail rifle rail.

You have 2 way to use this adaptor to your rifle:

1: by tightening a few screws on the side – the adaptor will stay on your rifle

can be locked with 2 x grab screws from top will stay tight and secure.

2: take the side screws off place the adaptor to your scope mount rail

then when tight the scope mount rail will be squeezed and grab the rifle rail.