EDGUN LESHIY 1/2 UNF OFF SET MODERATOR ADAPTOR

This adaptor will fit the EdGun Leshiy with 250mm barrel 177 .22 and .25 caliber.

Please follow this guide, to ensure correctly installation.

1. Remove front securing ring and O’ring from the end of the moderator.

2. Extract the plastic baffle.

3. Carefully line up the 1/2” UNF adaptor hole with your baffle.

4. Make a 2x 2.5mm hole on your baffle then place the screws and tighten up with the supplied locking nuts.

5. Place the O’ ring between the baffle and the adaptor.

6. Reinsert the baffle and tighten it with the new securing ring.

7. Lock the securing ring and baffle with the supplied, 3x M3 grub screws.

Important:

Please follow this guide correctly, if you miss one of the steps your baffle will move while you tighten the moderator, which could result in damage.