Quick Coupler QD With Long Base Socket

Eaglevisioncam high quality Quick Coupler kit made of stainless steel by CNC

Best solution that enables a quick and easy change from one filling probe to another.

The Kit Contains:

• 1 x Eagle Vision 1/8″ BSP Long Base Quick Coupler Socket + 10 x O-rings
• 3 x Quick Coupler Plugs with 10 x o-ring sealed with each plug
• 1 x Silicone Grease
• 1 x Cylinder Pressure Test and Dust Plug Connector.
• 1 x Quick Coupler Decanting Connector.

Our threads are compatible with all the standard hoses and probes with a 1/8″ BSP Female.

DO NOT use bonded seal washers between your filling probes and our plugs.
The minimum diameter of the spanner area to place the O-rings like in the above picture should not be less then 12.5 mm.

The probes and socket are not included, they are there just to show how it can be fitted.

Lifetime guarantee (O-rings are not included).

Our quick release pockets and plugs fit only standard brands available on the market, such as
Best Fittings, Fx, Daystate and other well-known brands.
Please mind that this product may not be compatible with the Chinese or aftermarket models.

Please note:
Before using our fill probes, you can connect it first to the air cylinder or pump.
A short controlled blast of air is required to clear away any debris that might have collected inside.
Wear safety glasses, do not look into the probe during this process.