Please note:
The accessories are not included, they are available to purchase separately.
The mount design for PCP and spring air rifle.
Only in fully open position you can take the elevation screws off otherwise you will damage the mount.
Description:
We have designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws.
This mount can be used as low profile or be adjusted to the high profile too if your scope objective its too closed to your rifle barrel or shroud.
This invention resolves a lot of problems for shooters who like to shoot long range and often run out of adjustment clicks on their turrets.
The mount can also come handy if you have not been able to use your favorite scope due to lack of space between the rings or the odd position of your dovetail or picatinny rail on your gun.
We are very proud of this product as it became a “must have” between people who love their bullpups.
The best application of this mount however is for people who want to reach out far more than their ordinary mounts allows them to. By keeping the front mount at it lowest and elevating the rear mount to the highest point you can zero in your gun far beyond your normal mounts allows you to, without using the clicks on your turrets hence keeping the optical centre of your scope intact (ideal situation for long range shooting).
Bellow is the technical data of our new mount called INFINITY:
Hight: 60.7mm to 65.7mm (adjustable)
Profile Hight: 21mm
Adjustable Height: 4.5mm.
Weight: 86g each one.
Centre of the ring to the bottom of the rail: 36mm (in closed position).
Centre of the ring to the bottom of the rail: 40.5mm (in open position).
Ring size: 30mm
Rail size: 20mm picatinny
Item includes:
-
2x infinity scope mount.
-
2x allen key (different sizes).
-
4x spare screws.
-
1x large spear screw.
-
1x protection ring fabric.
-
1x waterproof case.
Pressure calculation:
Ring screws maximum Torque,
15-20 Inch-pounds Force to 1.68-2.25 NM Newton Meters.
Adjustable side screws maximum Torque,
53-71 Inch-pounds Force to 6-8 NM Newton Meters.
Picatinny nuts maximum Torque,
53-71 Inch-pounds Force to 6-8 NM Newton Meters.
Available Accessories:
-
Mounting Adapter: converting 20mm Picatinny to 11mm dovetail.
-
Ring adapter: converting 30mm ring to 25mm ring.
-
Accessory top ring with Picatinny rail on top of each ring (very good for mounting a torch).
-
Bubble levels (Clear/Yellow/Blue/Black/Red/Green/Orange)
-
Extra picatinny bracket which can be added to the side of the mounts. (4 can be added easily).
farmpestmanagement –
WOW! What can I say… These rings are a must-have if you want to do any long-range shooting passed 100 meters plus…
These rings have given me more clicks back on my scope, allowing me to dial in much further distances without using “hold over”…
At 200 meters, I just dial the distance on my turrets and use my centre crosshairs…Perfect!
Once again, Eagle Vision Cam comes through with high quality, fit and finishes along with the amazingly smooth feel and ease of use these rings offer…!
A lovely bit of kit for my FX Mk11.
PS: Get the bubble level also that screws into the rings…
Cheers, Mark
Rob Davenport (verified owner) –
Have these on all my rifles, value for money and would highly recommend.
swingfire (verified owner) –
Having purchased a set of these mounts back in early September 2023. I can fully endorse the quality of these mounts. The items were being shown as in stock and arrived within 3 days of ordering. They were extremely well packaged and contained full fitting instructions, along with the 11mm dovetail/picatinny converters and coloured bubble I purchased.
The mounts are easy to fit, exceptionally good adjustability for head positioning and quick to dismount using the thumbscrew method. My accuracy was fully maintained during multiple times of removal when swooping out glassware or gun cleaning.
These mounts I fitted to my Pard DS35-70 LRF Gen2, and they fitted perfectly onto a FX Panthera Hunter Compact. To a point, I have now just a ordered my second pair of EV mounts to fit a Arken ELP4 scope.
These mounts are extremely well made, easy to fit, well packaged and without doubt ‘value for money’.
Would certainly recommend these products to other colleagues within the shooting community.
Kindest regards
Dave
swingfire (verified owner) –
I have now just purchased my second set of Infinity Elevation Adjustable mounts in INS-30mm from Eagle Vision. The first pair are fitted to my Gen2 Pard DS35 70LRF, with the new pair now attached to a Arken ELP4 6-24×50.
I wanted Picatinny quick demountable scope mounts, preferably with thumbscrews fitted and fully adjustable in height for magazine clearance, alongside rocking forward and backward. The EV INS-30 have provided absolutely perfect in maintaining zero when exchanging between both scopes for either day to night usage. No fiddly hex keys required once the mounts are fitted to each scope, the thumb screws can be tightened or loosened with a lightly gloved hand. These mounts are high quality CNC tooled finished and made in UK! They arrived within 24 hours of ordering, perfectly protected, boxed, then mount’s were placed inside a hardened zipper case along with suitable hex keys. I would therefore highly recommend these Eagle Vision mounts and thanks also to Masood and this team for supporting our sporting world.
rayd49 (verified owner) –
Very good quality, well machined scope mounts, replaced my Hawke adjustable mounts, well worth the investment if you shoot long range.