Infinity Elevation Ajustable Scope Mount 40mm Ring Picatinny INS-40

^{Please note:}

^{The accessories are not included, they are available to purchase separately.}

^{The mount design for PCP and spring  air rifle.}

Only in fully open position you can take the elevation screws off otherwise you will damage the mount.

Description:

^{We have designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws.}

^{This mount can be used as low profile or be adjusted to the high profile too if your scope objective its too closed to your rifle barrel or shroud.}

^{This invention resolves a lot of problems for shooters who like to shoot long range and often run out of adjustment clicks on their turrets.}

^{The mount can also come handy if you have not been able to use your favorite scope due to lack of space between the rings or the odd position of your dovetail or picatinny rail on your gun.}

^{We are very proud of this product as it became a “must have” between people who love their bullpups.}

^{The best application of this mount however is for people who want to reach out far more than their ordinary mounts allows them to. By keeping the front mount at it lowest and elevating the rear mount to the highest point you can zero in your gun far beyond your normal mounts allows you to, without using the clicks on your turrets hence keeping the optical centre of your scope intact (ideal situation for long range shooting).}

^{Bellow is the technical data of our new mount called INFINITY:}

• ^{Hight: 60.7mm to 65.7mm (adjustable)}
• ^{Profile Hight: 21mm}
• ^{Adjustable Height: 4.5mm.}
• ^{Weight: g each one.} 
• ^{Centre of the ring to the bottom of the rail:  mm (in closed position).}
• ^{Centre of the ring to the bottom of the rail: mm (in open position).}
• ^{Ring size: 40mm} 
• Rail size: 21.21mm picatinny

Item includes:

• 2x infinity scope mount.

• 2x allen key (different sizes).

• 4x spare screws.

• 1x large spear screw.

• 1x protection ring fabric.

• 1x waterproof case.

Pressure calculation:

• Ring screws maximum Torque: 15-20 Inch-pounds Force to 1.68-2.25 NM Newton Meters.
• Adjustable side screws maximum Torque: 53-71 Inch-pounds Force to  6-8 NM Newton Meters.
• Picatinny nuts maximum Torque: 53-71 Inch-pounds Force to  6-8 NM Newton Meters.

Available Accessories

• Mounting Rail Adapter
  Precision-machined adapter converting a 21.21 mm (MIL-STD-1913) Picatinny rail to 11 mm or 13 mm dovetail interfaces for secure and repeatable mounting.
• Ring Adapter
  Reducer inserts for converting 30 mm scope rings to 25 mm, or 34 mm rings to 30 mm, maintaining concentric alignment and proper clamping force.
• Ring-Mounted Picatinny Bracket
  Mini 26 mm Picatinny rail mounted circumferentially around the scope ring. Side-mount configuration allows up to four brackets per ring. Designed for auxiliary devices such as torches, laser aiming modules, or secondary optics aligned with the primary scope.
• Base-Mounted Picatinny Rail
  Mini 25 mm Picatinny rail mounted on the side of the base, providing a rigid attachment point for torches or laser devices aligned with the rifle barrel.
• Extension Picatinny Rail
  Available in three mounting positions. Designed to support heavy-duty accessories such as high-output torches or laser devices aligned with the rifle scope. Installed by replacing the top ring components of the mount.
• M4 Screw Bubble Levels
  Available in Yellow, Clear, Blue, Black, Red, Orange, and Green for optimal visibility in varying lighting conditions.
• 360° Bubble Level
  Rotational bubble level allowing installation at any position around the scope mounting system for flexible placement and effective rifle cant control.
• Angle Indicator
  Mechanical inclination indicator displaying rifle angle to assist with ballistic compensation during uphill and downhill shooting.