THIS KIT IS INCLOUDE
1: STANDARD KIT
This kit will fit to 99% of the scopes and smarts phones
- STANDARD KIT
- the kit comes with UN-1 UN-2 UN-3 MPH-1 6X 12MM steel screw
- 6X 12MM steel screw 6X 6MM nylon screw 6X 12MM nylon screw and soft curry pouch
- THE UNIVERSAL SCOPE HOLDER USH-46the USH-46 are design to hold all the scope with or with out threads on eye relief and will connect to our existing camera mounting system,this unit can be connect to 99% of the scopes from eye relief outer with dimension of 39mm to 46.5mm and it will find the centre automatically while you are tighten it.
UNIVERSAL MOBILE PHONR HOLDER UMPH-90
is design to hold almost all the smart phone to your scope with or with out protection cover case and with clamping screw or with magnet,
Universal Mobile Phone Holder
We suggest you to get extra hard flat protection case for your phone then stick magnet to your case and the plate,
If you are using our magnet on your smart phone holder you need to make sure magnet NOT effect your smart phone check on google before start using it as we don’t take any responsibility of this issue.
Free case with any camera mounting system over £150 case wort £20
- All out tube threds sizes are m42 x 0.6mm
- UN-1: The inside diameter of the middle size tub is 39 mm Length 53mm outside diameter 44mm
- UN-2: The inside diameter of the un-2 middle size tub is 43.7mm Length 62mm out side diameter 50.5mm
- UN-3: The inside diameter of the UN-3 large size tub is 50.5mm Length 62mm out side diameter 56.5mm
- MPH-1 mobil phone ring MPH-1 thread size 17mm
- STEEL SCREW
- NYLON SCREW
- all the screw are m42 and you can put them together .